Alvium 1800 C-510
Machine vision sensors for embedded system developers
Alvium 1800 C-510には、5.1 MP解像度で、1秒間に81.0フレームが可能なSony IMX548が搭載されています。
仕様The powerful Alvium 1800 C MIPI CSI-2 camera series gives embedded system developers access to Sony’s high-performance image sensors popular in the machine vision industry. These sensors with resolutions up to 20 megapixels deliver excellent image quality and up to twice the frame rates compared to similar Alvium 1500 C models.
技術データ
| インターフェース | MIPI CSI-2, up to 4 lanes |
|---|---|
| 解像度 | 2464 (H) × 2064 (V) |
| センサー | Sony IMX548 |
| センサータイプ | CMOS |
| センサーサイズ | Type 1/1.8 |
| ピクセルサイズ | 2.74 µm × 2.74 µm |
| シャッターモード | GS (Global shutter) |
| レンズマウント（使用可能） | C-Mount, CS-Mount, S-Mount |
| フル解像度時の最大フレームレート | 81 fps using 4 lanes, RAW8 (GREY) |
| ADC | 12 Bit |
| イメージバッファー（RAM） | 256 KByte |
| 不揮発性メモリー（フラッシュ） | 1024 KByte |
Imaging performance data is based on the evaluation methods in the EMVA 1288 Release 3.1 standard for characterization of image sensors and cameras. Measurements are typical values for monochrome models measured without optical filter.
| 529nmでの量子効率 | 68 % |
|---|---|
| 一時的な暗騒音 | 2.3 eˉ |
| 飽和容量 | 9400 eˉ |
| ダイナミックレンジ | 70 dB |
| 絶対感度閾値 | 2.9 eˉ |
| ビット深度 | 12-bit |
|---|---|
| モノクロピクセル形式 | PFNC: Mono8, Mono10, Mono10p, Mono12, Mono12p | CSI-2: RAW8 , RAW10, RAW12 | FOURCC: GREY, Y10, Y12 |
| Raw color pixel formats | PFNC: BayerGR8, BayerGR10, BayerGR10p, BayerGR12, BayerGR12p |
| TTL I/O | 2 programmable GPIOs |
|---|
| 電源要件（DC） | 5 VDC over MIPI CSI-2 |
|---|---|
| 消費電力 | Typical: 2.8 W |
Image control: Auto
- Auto exposure
- Auto gain
- Auto white balance (color models)
Image control: Other
- Black level
- Color transformation (incl. hue, saturation; color models)
- De-Bayering up to 5×5 (color models)
- DPC (defect pixel correction)
- FPNC (fixed pattern noise correction)
- Gamma
- Reverse X/Y
- ROI (region of interest)
Camera control
- Acquisition frame rate
- Firmware update in the field
- I/O and trigger control
- Temperature monitoring
Installing and operating the camera
Extended hardware options
Software and firmware
- Software downloads: Embedded software and drivers
- To obtain firmware for your Alvium CSI-2 camera, please contact Support.
FAQs and application notes
- Knowledge base:
Search the knowledge base for technical papers.
- Application notes overview:
Click here to search from all available application notes!
- Application notes recommended for Alvium CSI-2 cameras:
Brochures and flyers
Data sheets
3D CAD files (STEP) for Alvium cameras and accessories
You can download STEP components for Alvium models and Alvium accessories at the Alvium STEP file download page.
Or you can download prepared sets of components for standard Alvium models like this:
- You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org.
- Go to the Camera Selector, select your Alvium model, and configure the corresponding hardware option (such as an Open Housing C-Mount camera).
- In the tile showing your Alvium submodel, open the "STEP files" link. See the image below.
- Download the files from the link selection shown at the bottom of the tile.
- To assemble housed cameras from the STEP file components, follow the Instructions included in the link collection.
カメラの設定
アクセサリー
アライドビジョン認定のマシンビジョンアクセサリーは、お客様の用途に最適な画質と最大限の信頼性を提供するために、当社の専門家が選定したものです。 当社の技能者と技術者は、レンズやインターフェースケーブルなどのアクセサリーを当社のカメラと組み合わせて、広範囲にわたるテストを行っています。このようにして、アライドビジョン製カメラの性能を最大限に発揮できるよう、最適なアクセサリーを推奨しております。
Software integration made easy
Alvium GigE, 5GigE, and USB cameras can be easily integrated into embedded systems with Allied Vision's next generation Vimba X SDK, a fully GenICam-compliant platform-independent SDK for all Allied Vision cameras with GigE, 5GigE and USB3 Vision Interface.
GenICam-based Transport Layers support the Alvium cameras and can automatically connect them to third-party software solutions such as MATLAB, OpenCV, Halcon, CVB, and many more.
To operate Alvium CSI-2 cameras on your vision system, Allied Vision provides different access modes:
- GenICam for CSI-2 Access controls the camera by GenICam features, using the Alvium CSI-2 driver and CSI-2 transport layer (TL) directly.
- Direct Register Access (DRA) to control the cameras via registers for advanced users.
- Video4Linux2 Access allows to control the cameras via established V4L2 API and applications like GStreamer and OpenCV.
Open-source CSI-2 drivers are available on GitHub for different