Camera Selector
The GigE Vision refresh

Alvium G1-507

Alvium G1 -507
Alvium G1 -507
Alvium G1 – Reliability designed for the future

Compact GigE camera for constant image quality

Alvium G1-507 with Sony IMX264 runs 23.0 frames per second at 5.1 MP resolution.

Configure

Alvium G1 is the first GigE Vision camera powered by ALVIUM® Technology, Allied Vision's ASIC chip. It combines the advantages of the established GigE Vision standard with the flexibility of the Alvium platform. In addition to a comprehensive feature set and a broad sensor selection, it offers great versatility. With its very compact housing and industrial standard hardware, it can easily be integrated into any vision system while ensuring long-term availability and reliability.

Technical data

Interface IEEE 802.3 1000BASE-T, IEEE 802.3af (PoE)
Resolution 2464 (H) × 2056 (V)
Sensor Sony IMX264
Sensor type CMOS
Sensor size Type 2/3
Pixel size 3.45 µm × 3.45 µm
Shutter mode GS (Global shutter)
Lens mounts (available) C-Mount, CS-Mount
Max. frame rate at full resolution 23 fps at 122 MByte/s, Mono8
ADC 12 Bit
Image buffer (RAM) 32 MByte
Non-volatile memory (Flash) 1024 KByte

Imaging performance data is based on the evaluation methods in the EMVA 1288 Release 3.1 standard for characterization of image sensors and cameras. Measurements are typical values for monochrome models measured without optical filter.

Quantum efficiency at 529 nm 64 %
Temporal dark noise 2.1 eˉ
Saturation capacity 10400 eˉ
Dynamic range 72 dB
Absolute sensitivity threshold 2.7 eˉ
Bit depth 12-bit
Monochrome pixel formats Mono8, Mono10, Mono10p, Mono12, Mono12p, Mono12Packed
Raw color pixel formats BayerRG8, BayerRG10, BayerRG10p, BayerRG12, BayerRG12p, BayerRG12Packed
TTL I/Os 2 GPIOs (LVTTL)
Opto-isolated I/Os 1 input, 1 output
Power requirements (DC) 10.8 to 26.4 VDC AUX | IEEE 802.3af, Power Class 0 PoE
Power consumption External power: 3.1 W at 12 VDC (typical) | Power over Ethernet: 3.4 W (typical)

Image control: Auto

  • Auto exposure
  • Auto gain
  • Auto white balance (color models)

 

Image control: Other

  • Adaptive noise correction
  • Binning
  • Black level
  • Color transformation (incl. hue, saturation; color models)
  • Contrast
  • Custom convolution
  • De-Bayering up to 5×5 (color models)
  • DPC (defect pixel correction)
  • FPNC (fixed pattern noise correction)
  • Gamma
  • LUT (look-up table)
  • Reverse X/Y
  • ROI (region of interest)
  • Sharpness/Blur

 

Camera control

  • Acquisition frame rate
  • Bandwidth control
  • Counters and timers
  • Firmware update in the field
  • I/O and trigger control
  • Sequencer
  • Serial I/Os
  • Temperature monitoring
  • User sets

Software and firmware

FAQs and application notes

  • Knowledge base:

Search the knowledge base for technical papers.

  • Application notes overview:

Click here to search from all available application notes!

  • Application notes recommended for Alvium GigE cameras:

Data sheets

3D CAD files (STEP) for Alvium cameras and accessories

You can download STEP components for Alvium models and Alvium accessories at the Alvium STEP file download page.

Or you can download prepared sets of components for standard Alvium models like this:

 

  1. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org.
  2. Go to the Camera Selector, select your Alvium model, and configure the corresponding hardware option (such as an Open Housing C-Mount camera).
  3. In the tile showing your Alvium submodel, open the "STEP files" link. See the image below.
  4. Download the files from the link selection shown at the bottom of the tile.
  5. To assemble housed cameras from the STEP file components, follow the Instructions included in the link collection.

Configure your camera!

Accessories

Allied Vision approved machine vision accessories have been selected by our experts to deliver best possible image quality to your application with the greatest possible reliability. Our technicians and engineers conduct extensive tests with accessories such as lenses and interface cables in combination with our cameras. That way, we can recommend the best possible accessories and ensure maximal performance of your Allied Vision camera.

Perfectly connected - thanks to powerful software

Software integration made easy

Alvium GigE, 5GigE, and USB cameras can be easily integrated into embedded systems with Allied Vision's next generation  Vimba X SDK, a fully GenICam-compliant platform-independent SDK for all Allied Vision cameras with GigE, 5GigE and USB3 Vision Interface.

GenICam-based Transport Layers support the Alvium cameras and can automatically connect them to third-party software solutions such as MATLAB, OpenCV, Halcon, CVB, and many more.

 

To operate Alvium CSI-2 cameras on your vision system, Allied Vision provides different access modes:

  • GenICam for CSI-2 Access controls the camera by GenICam features, using the Alvium CSI-2 driver and CSI-2 transport layer (TL) directly.
  • Direct Register Access (DRA) to control the cameras via registers for advanced users.
  • Video4Linux2 Access allows to control the cameras via established V4L2 API and applications like GStreamer and OpenCV.

Open-source CSI-2 drivers are available on GitHub for different