Camera Selector
Show data sheet
{{ totalBookmarksCount }}
Bookmarks
Small size - powerful performance

Mako G-030

Mako G-030
Mako G-030
Small and powerful

Ultra-compact GigE Vision cameras

Discontinued

Mako G-030 with CMOSIS/ams CMV300 runs 309.0 frames per second at 0.3 MP resolution.

Bookmark Remove from Bookmarks

Mako G is an attractively priced GigE Vision-compliant camera in a compact rugged industrial housing. Many models include advanced functionalities such as Precision Time Protocol (PTP), Trigger over Ethernet (ToE) Action Commands, and Power over Ethernet (PoE). Screw mount RJ45 connector and multiple I/Os facilitate your straightforward system integration. Mako G cameras are also avilable as Near Infrared (NIR) and polarizer variants.

Technical data

Interface IEEE 802.3 1000BASE-T, IEEE 802.3af (PoE)
Resolution 644 (H) × 484 (V)
Sensor CMOSIS/ams CMV300
Sensor type CMOS
Sensor size Type 1/3
Pixel size 7.4 µm × 7.4 µm
Shutter mode Global shutter
Lens mounts (available) C-Mount, CS-Mount, S-Mount
Max. frame rate at full resolution 309 fps
ADC 12 Bit
Image buffer (RAM) 64 MByte

Imaging performance data is based on the evaluation methods in the EMVA 1288 Release 3.1 standard for characterization of image sensors and cameras. Measurements are typical values for monochrome models measured at full resolution without optical filter. Contact Sales or AE for more information.

Quantum efficiency at 529 nm 55 %
Temporal dark noise 12.9 eˉ
Saturation capacity 9300 eˉ
Dynamic range 56.7 dB
Absolute sensitivity threshold 13.4 eˉ
Bit depth 8/12 Bit
Monochrome pixel formats Mono8, Mono12, Mono12Packed
Raw pixel formats BayerRG8, BayerRG12Packed, BayerRG12
Operating temperature +5 °C to +45 °C housing temperature
Power requirements (DC) 12 to 24 VDC AUX or 802.3at Type 1 PoE
Power consumption 2.1 W at 12 VDC; 2.3 W PoE
Mass 80 g (with C-Mount)
Body dimensions (L × W × H in mm) 60.5 × 29.2 × 29.2 (including connectors)
Regulations CE: 2014/30/EU (EMC), 2011/65/EU, including amendment 2015/863/EU (RoHS); FCC Class B; CAN ICES-003

Image optimization features:

  • Auto gain (manual gain control: 0 to 26 dB; 1 dB increments)
  • Auto exposure (manual exposure control: 83 µs to 2 s; 1 µs increments)
  • Auto white balance (G-030C only)
  • Color correction, hue, saturation (G-030C only)
  • Decimation
  • Defect pixel masking (user defined with Defect Mask Loader tool)
  • Gamma correction
  • One look-up table
  • Piecewise Linear HDR mode
  • Region of interest, separate region for auto features
  • Reverse X/Y

Camera control features:

  • Event channel
  • Image chunk data
  • IEEE 1588 Precision Time Protocol
  • Storable user sets
  • StreamBytesPerSecond (bandwidth control)
  • Stream hold
  • Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
  • Temperature monitoring (main board only)
  • Trigger over Ethernet Action Commands

Mako G-030 is ideal for a wide range of applications including:

  • Robotics
  • Quality control
  • Inspection, surveillance
  • Industrial imaging
  • Machine vision
  • Logistics

Software and firmware

FAQs and application notes

  • Knowledge base:

Search the knowledge base for technical papers.

  • Application notes overview:

Click here to search from all available application notes!

  • Application notes recommended for Mako:

Data sheets

3D CAD Files (STEP)

Please right-click the link of a 3D model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org.

Accessories

Allied Vision approved machine vision accessories have been selected by our experts to deliver best possible image quality to your application with the greatest possible reliability. Our technicians and engineers conduct extensive tests with accessories such as lenses and interface cables in combination with our cameras. That way, we can recommend the best possible accessories and ensure maximal performance of your Allied Vision camera.

Perfectly connected – thanks to powerful software

Vimba Suite

Have you heard of Vimba, our platform independent SDK (software development kit)?

Thanks to our in-house software you can easily integrate our cameras into any system and manage them centrally.

Vimba runs on Windows, Linux, and Linux for ARM.
With Vimba, you can acquire images and control your Allied Vision camera instantly, program complex vision applications or connect to third-party libraries.


Learn more about Vimba