Pike F-421

Pike

F-421

  • Versatile IEEE 1394b camera
  • Advanced feature set
  • Many variants
  • High frame rates

4 Megapixel camera with ON Semiconductor KAI-4022 type 1.2 sensor – high resolution, low noise

The Pike F-421B/F-421C is equipped with an ON Semiconductor type 1.2 CCD sensor. The reason for this large sensor format is the goal to achieve high resolution images with low noise. The sensor has a wide pixel pitch of 7.4 μm. At full resolution, the camera runs up to 16 frames per second. Higher frame rates can be reached by using a smaller area of interest (AOI), binning (b/w), or sub-sampling.

 

Options:

  • IEEE 1394b connectors: 2 x copper (daisy chain) or 1 x GOF, 1 x copper, Hirose power: out
  • Various IR cut/pass filters, various lens mounts
  • Angled head, white medical housing
  • 性能参数
  • 特性
  • 应用场景
  • 量子转换效率
  • 下载
  • Accessories
接口
IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional
分辨率
2048 (H) × 2048 (V)
传感器
OnSemi KAI-4022
传感器类型
CCD Progressive
传感器尺寸
Type 1.2
像元尺寸
7.4 µm x 7.4 µm
镜头接口
C-Mount
Frame rate
16 fps
ADC
14 Bit
缓存 (RAM)
64 MByte
输出
Bit位数
8-14 Bit
黑白模式
Mono8, Mono12, Mono16
彩色模式RGB
RGB8
原始模式
Raw8, Raw12, Raw16
通用输入输出口(GPIOs)
光耦 I/Os
2 inputs, 4 outputs
RS-232
1
工作条件/尺寸
工作温度
+5 °C to +50 °C
电源要求 (DC)
8 V to 36 V
功耗 (@12 V)
4 W
重量
250 g
尺寸(L × W × H in mm)
96.8 × 44 × 44 (including connectors)
符合规范
CE, RoHS, REACH, WEEE, FCC
  • High SNR mode (up to 24 dB better signal-to-noise ratio)   
  • Low-noise binning mode   
  • Smear reduction   
  • Shading correction   
  • Area of interest (AOI), separate AOI for auto features   
  • Binning   
  • Decimation   
  • Auto gain (manual gain control: 0 to 22 dB)   
  • Auto exposure (70 µs to 67 s)   
  • Auto white balance   
  • Look-up table (LUT)   
  • Hue, saturation, color correction   
  • Reverse X   
  • Deferred image transport   
  • Trigger programmable, level, single, bulk, programmable delay   
  • Sequence mode (changes the camera settings on the fly)   
  • SIS (secure image signature, time stamp for trigger, frame count)   
  • Storable user sets   

Equipped with a large sensor format (type 1.2), the Pike F-421B/F-421C is the perfect fit for low-light applications. It is distinguished by high-resolution images and an extraordinary image quality with very low noise. The smart pre-processing features of the Pike even enhance the image quality.

This Pike camera is especially suited for:

  • Applications which require the highest image quality even with low light
  • OEM applications (modular concept)
  • Microscopy
  • Science and research
  • Intelligent traffic solutions (ITS)
  • Long cable lengths, 400 meters and more (fiber version)
Lenses

Please note: This selector filters lenses on technical criteria only. To find the right lens for your application requirements, please ask our Sales and Support teams for advice.

Lens
Manufacturer
Mount
Focal Length
F-Stop
传感器尺寸
加入书签
{{lens.manufacturer.title}} {{lens.id}} {{lens.id}}
{{lens.manufacturer.title}}
{{lens.mount.title}}
{{lens.focalLength}} mm
{{lens.fStop.title}}
{{lens.sensorSize.title}}
   
Interface cables
Interface Cable
基本描述
Camera Interface
加入书签
{{interfaceCable.manufacturer.title}} {{interfaceCable.partNumber}} {{interfaceCable.partNumber}}
{{interfaceCable.description}}
{{joinObjects(interfaceCable.cameraInterfacefilter)}}
   
Interface cards
Interface Card
基本描述
Camera Interface
加入书签
{{interfaceCard.manufacturer.title}} {{interfaceCard.partNumber}} {{interfaceCard.partNumber}}
{{interfaceCard.description}}
{{joinObjects(interfaceCard.cameraInterfacefilter)}}
   
Trigger, I/O & power cables
Cable
基本描述
Camera Series
加入书签
{{trigger.manufacturer.title}} {{trigger.partNumber}} {{trigger.partNumber}}
{{trigger.description}}
{{series.title}}{{$last ? '' : ', '}}
   
Hubs & Repeaters
Hubs & Repeaters
基本描述
Camera Interface
加入书签
{{networking.manufacturer.title}} {{networking.partNumber}} {{networking.partNumber}}
{{networking.description}}
{{networking.cameraInterfacefilter.title}}
   
Tripod adapters
Tripod Adapter
基本描述
Camera Series
加入书签
{{tripodAdapter.manufacturer.title}} {{tripodAdapter.partNumber}} {{tripodAdapter.partNumber}}
{{tripodAdapter.description}}
{{series.title}}{{$last ? '' : ', '}}
   
Power supplies
Power Supply
基本描述
Camera Series
加入书签
{{powerSupply.manufacturer.title}} {{powerSupply.partNumber}} {{powerSupply.partNumber}}
{{powerSupply.description}}
{{series.title}}{{$last ? '' : ', '}}
   
OnSemi KAI-4022 CCD Progressive sensor graph

Datasheets

Camera installation and technical manual

Additional documentation

3D CAD files (STEP)

Please right-click the link of a 3D camera model and select save as to download the file. After downloading,  unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: http://www.ida-step.net/

Software and firmware

Vimba is our current future-proof SDK.

 

You can also download legacy software for 1394 cameras.

 

To obtain firmware for your 1394 camera, please contact our technical support team.